dmesg do playstation 3

<4>Crash kernel location must be 0×2000000
<6>Reserving 0MB of memory at 32MB for crashkernel (System RAM: 128MB)
<7> -> ps3_os_area_save_params:728
<7>ps3_os_area_save_params:754: h.magic_num:       ‘cell_ext_os_area’
<7>ps3_os_area_save_params:754: h.hdr_version:     1
<7>ps3_os_area_save_params:754: h.db_area_offset:  2
<7>ps3_os_area_save_params:754: h.ldr_area_offset: 4
<7>ps3_os_area_save_params:754: h.ldr_format:      1
<7>ps3_os_area_save_params:754: h.ldr_size:        26104ah
<7>ps3_os_area_save_params:755: p.boot_flag:       1
<7>ps3_os_area_save_params:755: p.num_params:      3
<7>ps3_os_area_save_params:755: p.rtc_diff         946687952
<7>ps3_os_area_save_params:755: p.av_multi_out     0
<7>ps3_os_area_save_params:755: p.ctrl_button:     0
<7>ps3_os_area_save_params:755: p.static_ip_addr:  192.168.254.250
<7>ps3_os_area_save_params:755: p.network_mask:    255.255.255.0
<7>ps3_os_area_save_params:755: p.default_gateway: 192.168.254.254
<7>ps3_os_area_save_params:755: p.dns_primary:     201.10.1.2
<7>ps3_os_area_save_params:755: p.dns_secondary:   201.10.120.3
<7>ps3_os_area_save_params:756: db.magic_num:      ‘….’
<7>ps3_os_area_save_params:756: db.version:         0
<7>ps3_os_area_save_params:756: db.index_64:        0
<7>ps3_os_area_save_params:756: db.count_64:        0
<7>ps3_os_area_save_params:756: db.index_32:        0
<7>ps3_os_area_save_params:756: db.count_32:        0
<7>ps3_os_area_save_params:756: db.index_16:        0
<7>ps3_os_area_save_params:756: db.count_16:        0
<7>db_verify:353 magic_num failed
<7> <- ps3_os_area_save_params:767
<6>Using PS3 machine description
<7>Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 12
<4>Found initrd at 0xc000000000444000:0xc000000000526ece
<6>CPU maps initialized for 2 threads per core
<7> (thread shift is 1)
<4>Starting Linux PPC64 #3 SMP Mon Jun 9 15:25:08 CEST 2008
<4>—————————————————–
<4>ppc64_pft_size                = 0×14
<4>physicalMemorySize            = 0×8000000
<4>htab_hash_mask                = 0×1fff
<4>—————————————————–
<5>Linux version 2.6.25.4 (root@ps3tool.sonytel.be) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #3 SMP Mon Jun 9 15:25:08 CEST 2008
<4>*** 0000 : CF000012
<4>
<4>*** 0000 : Setup Arch
<4>[boot]0012 Setup Arch
<7>Entering add_active_range(0, 0, 32768) 0 entries of 256 used
<6>PS3 firmware version 2.6.0
<6>ps3fb videomemory: 18874368 bytes at c000000000700000
<6>ps3flash bounce buffer: 262144 bytes at c000000001900000
<7> -> ps3_os_area_init:778
<7> <- ps3_os_area_init:799
<7>Top of RAM: 0×8000000, Total RAM: 0×8000000
<7>Memory hole size: 0MB
<4>Zone PFN ranges:
<4>  DMA             0 ->    32768
<4>  Normal      32768 ->    32768
<4>Movable zone start PFN for each node
<4>early_node_map[1] active PFN ranges
<4>    0:        0 ->    32768
<7>On node 0 totalpages: 32768
<7>  DMA zone: 448 pages used for memmap
<7>  DMA zone: 0 pages reserved
<7>  DMA zone: 32320 pages, LIFO batch:7
<7>  Normal zone: 0 pages used for memmap
<7>  Movable zone: 0 pages used for memmap
<4>*** 0000 : CF000015
<4>
<4>*** 0000 : Setup Done
<4>[boot]0015 Setup Done
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32320
<5>Kernel command line: video=safe
<4>PID hash table entries: 512 (order: 9, 4096 bytes)
<7>time_init: decrementer frequency = 79.800000 MHz
<7>time_init: processor frequency   = 3192.000000 MHz
<6>clocksource: timebase mult[3220149] shift[22] registered
<7>clockevent: decrementer mult[146d] shift[16] cpu[0]
<4>Console: colour dummy device 80×25
<6>console [tty0] enabled
<6>Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
<6>Memory: 104752k/131072k available (3344k kernel code, 26160k reserved, 528k data, 303k bss, 192k init)
<7>Calibrating delay loop… 158.72 BogoMIPS (lpj=317440)
<4>Mount-cache hash table entries: 256
<7>clockevent: decrementer mult[146d] shift[16] cpu[1]
<4>Processor 1 found.
<6>Brought up 2 CPUs
<6>net_namespace: 296 bytes
<6>NET: Registered protocol family 16
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 1024 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 4096 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>TCP reno registered
<6>checking if image is initramfs… it is
<4>Freeing initrd memory: 907k freed
<6>ps3_system_bus_match:355: dev=4(vuart_01), drv=4(ps3_av): match
<6>squashfs: version 3.3 (2007/10/31) Phillip Lougher
<6>io scheduler noop registered
<6>io scheduler anticipatory registered (default)
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>ps3_system_bus_match:355: dev=10(ioc0_01), drv=10(ps3fb): match
<4>Console: switching to colour frame buffer device 72×48
<6>ps3fb ioc0_01: graphics fb0, using 18368 KiB of video memory
<6>Generic RTC Driver v1.07
<6>ps3_system_bus_match:355: dev=8(sb_03), drv=8(ps3flash): match
<6> -> dma_sb_region_create:648:
<6>ps3flash sb_03: First accessible region has index 5 start 473600 size 8192
<6>ps3flash sb_03: ps3flash_probe:388: registered misc device 63
<6>ps3disk_init:583: registered block device major 254
<6>ps3_system_bus_match:355: dev=6(sb_02), drv=6(ps3disk): match
<6> -> dma_sb_region_create:648:
<6>ps3disk sb_02: First accessible region has index 3 start 57168648 size 20971512
<6>ps3disk sb_02: ps3da is a ST940210AS (38154 MiB total, 10239 MiB for OtherOS)
<6> ps3da: unknown partition table
<6>brd: module loaded
<6>loop: module loaded
<6>ps3_system_bus_match:355: dev=3(sb_04), drv=3(ps3_gelic_driver): match
<6>dma_sb_region_create_linear:980: forcing 16M pages for linear map
<6> -> dma_sb_region_create:648:
<6>ps3_gelic_driver sb_04: internal vlan enabled
<6>ps3_gelic_driver sb_04: eth0: MAC addr 00:1f:a7:0a:e0:e4
<6>ps3_system_bus_match:355: dev=7(sb_01), drv=7(ps3rom): match
<6> -> dma_sb_region_create:648:
<6>scsi0 : ps3rom
<5>scsi 0:0:0:0: CD-ROM            SONY     PS-SYSTEM   302R 4109 PQ: 0 ANSI: 0
<4>Driver ’sd’ needs updating – please use bus_type methods
<4>Driver ’sr’ needs updating – please use bus_type methods
<4>sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 0:0:0:0: Attached scsi CD-ROM sr0
<6>ps3_system_bus_match:355: dev=1(sb_05), drv=1(ps3-ehci-driver): match
<6>dma_sb_region_create_linear:980: forcing 16M pages for linear map
<6> -> dma_sb_region_create:648:
<6>ps3-ehci-driver sb_05: PS3 EHCI Host Controller
<6>ps3-ehci-driver sb_05: new USB bus registered, assigned bus number 1
<6>ps3-ehci-driver sb_05: irq 31, io mem 0×400000070000
<6>ps3-ehci-driver sb_05: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<3>PS3AV_CID_AV_VIDEO_DISABLE_SIG: failed 2 port:10
<6>ps3_system_bus_match:355: dev=1(sb_07), drv=1(ps3-ehci-driver): match
<6>dma_sb_region_create_linear:980: forcing 16M pages for linear map
<6> -> dma_sb_region_create:648:
<6>ps3-ehci-driver sb_07: PS3 EHCI Host Controller
<6>ps3-ehci-driver sb_07: new USB bus registered, assigned bus number 2
<6>ps3-ehci-driver sb_07: irq 32, io mem 0×400000080000
<6>ps3-ehci-driver sb_07: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<7>ohci_hcd: 2006 August 04 USB 1.1 ‘Open’ Host Controller (OHCI) Driver
<6>ps3_system_bus_match:355: dev=2(sb_06), drv=2(ps3-ohci-driver): match
<6>dma_sb_region_create_linear:980: forcing 16M pages for linear map
<6> -> dma_sb_region_create:648:
<6>ps3-ohci-driver sb_06: PS3 OHCI Host Controller
<6>ps3-ohci-driver sb_06: new USB bus registered, assigned bus number 3
<6>ps3-ohci-driver sb_06: irq 33, io mem 0×400000090000
<6>usb 1-2: new high speed USB device using ps3-ehci-driver and address 2
<6>usb 1-2: configuration #1 chosen from 1 choice
<6>hub 1-2:1.0: USB hub found
<6>hub 1-2:1.0: 4 ports detected
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ps3_system_bus_match:355: dev=2(sb_08), drv=2(ps3-ohci-driver): match
<6>dma_sb_region_create_linear:980: forcing 16M pages for linear map
<6> -> dma_sb_region_create:648:
<6>ps3-ohci-driver sb_08: PS3 OHCI Host Controller
<6>ps3-ohci-driver sb_08: new USB bus registered, assigned bus number 4
<6>ps3-ohci-driver sb_08: irq 34, io mem 0×4000000a0000
<6>usb 2-2: new high speed USB device using ps3-ehci-driver and address 2
<6>usb 2-2: configuration #1 chosen from 1 choice
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>usb 1-2.1: new high speed USB device using ps3-ehci-driver and address 3
<6>Initializing USB Mass Storage driver…
<6>usb 1-2.1: configuration #1 chosen from 1 choice
<6>usb 1-2.2: new low speed USB device using ps3-ehci-driver and address 4
<6>usb 1-2.2: configuration #1 chosen from 1 choice
<6>scsi1 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 3
<7>usb-storage: waiting for device to settle before scanning
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>mice: PS/2 mouse device common for all mice
<6>input: HID 0566:3002 as /class/input/input0
<6>input: USB HID v1.10 Keyboard [HID 0566:3002] on usb-sb_05-2.2
<6>input: HID 0566:3002 as /class/input/input1
<6>input: USB HID v1.10 Device [HID 0566:3002] on usb-sb_05-2.2
<6>usbcore: registered new interface driver usbhid
<6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
<6>ps3_system_bus_match:355: dev=5(vuart_02), drv=5(ps3_sys_manager): match
<6>TCP cubic registered
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<4>Freeing unused kernel memory: 192k freed
<5>scsi 1:0:0:0: Direct-Access     Kingston DataTravelerMini PMAP PQ: 0 ANSI: 0 CCS
<5>sd 1:0:0:0: [sda] 1955328 512-byte hardware sectors (1001 MB)
<5>sd 1:0:0:0: [sda] Write Protect is off
<7>sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
<3>sd 1:0:0:0: [sda] Assuming drive cache: write through
<5>sd 1:0:0:0: [sda] 1955328 512-byte hardware sectors (1001 MB)
<5>sd 1:0:0:0: [sda] Write Protect is off
<7>sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
<3>sd 1:0:0:0: [sda] Assuming drive cache: write through
<6> sda: sda1
<5>sd 1:0:0:0: [sda] Attached SCSI removable disk
<7>usb-storage: device scan complete
<7>ISO 9660 Extensions: RRIP_1991A

Ypiranga 4 x 2 Avenida

Ypiranga 4 x 2 Avenida

E o Ypiranga de Erechim vence mais uma no Gauchão 2009.
Os outros clubes que se cuidem… (inclusive a dupla Gre-Nal)

Ypiranga 2 x 0 Veranópolis

Ypiranga 2 x 0 Veranópolis

RHEL 5.3 liberado, CentOS 5.3 saindo do forno!

Em 21 de janeiro a Red Hat liberou o RHEL 5.3
As novidades incluem:
- Atualizações no Network Manager
- Suporte a EXT4
- Expandido o suporte a dispositivos de rede Intel, Broadcom, etc
- Criptografia para os dispositivos de armazenamento
- Melhoria no XEN e virtualização
- OpenJDK
- Melhorias no kernel
Em resumo: CentOS 5.3 está quase pronto!

Outras novidades:
- Suporte aos processadores Intel Core i7 (grande ganho de desempenho comparado as versões anteriores dos processadores Intel)
- Capacidade de servidores virtualizados com 32 CPUs virtuais e 80GBs de memória – é mole!
- Suporte total ao sistema de arquivos GFS2

Porque NÃO utilizar a RBL UCEProtect nos seus servidores de e-mail

Porque NÃO utilizar a RBL UCEProtect nos seus servidores de e-mail

OBS: nunca utilizei essa RBL, apenas algumas instituições fazem uso da mesma.

Motivos para não utilizar a RBL UCEProtect – http://www.uceprotect.net/

- Bloqueiam ranges de IP’s de forma adoidada, sem se preocupar com o resultado final (links importantes ficam a ver navios como se fossem links de spammers).

- Cobram 150 EUROS para remover “na faixa” o seu IP. 150 por IP, algo básico nos tempos atuais.

- Abaixo segue email-resposta da BrasilTelecom sobre a solicitação para remoção do range de IP’s indevidamente atingido pela famigerada “UCEProtect-Network”

Imagem do Email-Resposta da Brasil Telecom sobre o assunto (algo do tipo “como tirar o meu da reta”)

Se alguém mais tiver experiências com essa UCEProtect fique a vontade para fazer comentários.

E o pior motivo de todos Acaba com a sua paciência em plena sexta-feira

Erro ao usar Aptitude no Ubuntu 8.10

Erro ao usar aptitude no Ubuntu 8.10

shell> sudo aptitude update
E: Abrindo arquivo de configuração /usr/share/aptitude/aptitude-defaults.pt_BR – ifstream::ifstream (2 Arquivo ou diretório inexistente)

Solução:
shell> wget http://launchpadlibrarian.net/19491146/aptitude-defaults.pt_BR -O /usr/share/aptitude/aptitude-defaults.pt_BR
O arquivo acima foi traduzido por André Gondim.

Change MAC address on Debian Systems

As of version 0.090, udev has the ability to statically rename ethernet cards based on MAC address. The addresses are configured in /etc/udev/rules.d/z25_persistent-net.rules .  If you want the mappings to change, edit that file.  See <forcedeth mac>.  As of version 0.124-1 the file is called /etc/udev/rules.d/70-persistent-net.rules

VirtualBox 2.1.0 without bridge configuration

“Note: Even though TAP is no longer necessary on Linux with the new Host Interface Networking of VirtualBox 2.1, you can still use TAP interfaces for certain advanced setups, since you can connect a VM to any host interface – which could also be a TAP interface.”

Machine -> Settings -> Network
Attached to: Host Interface
Host Interfaces: eth0

The start your virtual machine, and configure IP address interface of guest operation system.
Enjoy!

Debian Etch 4 no CCE W92

Para testar o Xen resolvi instalar o Debian no CCE W92.
Lá vão algumas dicas para conseguir instalar o bicho:

- C3 function enabled na BIOS
- No carregamento do CD netinst: linux generic.all_generic_ide=1 vga=791 noapic nolapic acpi=off

Em resumo, CCE+Sis é um hardware bom pra fazermos malabarismos.

Fedora 10 on CCE W92

Notebook CCE W92 – http://www.cceinfo.com.br/pagina.php?IdPagina=2&Tipo=SPagina&ProdutoId=126&URL=produto-detalhe

CCE W92

To “solve” problems with hardware “sis”:
On Live CD Boot – add “xdriver=vesa” vga=791
After install Fedora 10, log on console.

shell> yum install system-config-display
shell> system-config-display
shell> vi /etc/X11/xorg.conf

Section “Device”
Identifier  “Videocard0″
Driver      “vesa”
EndSection

Section “Screen”
Identifier “Screen0″
Device     “Videocard0″
Monitor    “Monitor0″
DefaultDepth     24
SubSection “Display”
Viewport   0 0
Depth     24
EndSubSection
EndSection

Save file and start gnome!